An unsecured Wi-Fi network not only allows others to use your data allowance, but also opens the door for strangers to access your home network. Here are the steps you can take in 15 minutes.
1. Change your router’s admin password
Many routers still use the default admin password, such as “admin.” Anyone who’s connected can access the router’s settings. Go to the router’s settings page (usually an address like 192.168.0.1 or 192.168.1.1, listed on a sticker on the bottom of the router), then change the admin password to a strong one.
2. Use WPA2 or WPA3 encryption
In the wireless settings menu, select the WPA2-PSK (AES) or WPA3 security mode if your router supports it. Avoid WEP and “Open” mode, as they are easy to hack.
3. Create a strong Wi-Fi password
Use at least 12 characters that combine letters, numbers, and symbols. Avoid phone numbers, birthdates, or family names. Change the password if you suspect it has been compromised.
4. Turn off WPS
WPS allows devices to connect by pressing a button or entering a PIN. This feature is convenient but has known security vulnerabilities. Turn it off if you don’t actually use it.
5. Update your router’s firmware
Manufacturers release updates to patch security vulnerabilities. Check the System or Firmware Upgrade menu on your router’s dashboard.
6. Check connected devices
The DHCP Client List or Connected Devices menu displays all connected devices. If there are any unknown devices, change your Wi-Fi password.
7. Set up a guest network
Many routers support a Guest Network. Provide a guest network for visitors so they cannot access other devices in your home.
If your router is very old and no longer receives updates, replacing it with a new router is a worthwhile security measure.



