Laptop batteries gradually lose capacity over time. Windows provides a comprehensive battery report without the need to install any apps.
Steps to create a battery report
- Press the Windows key, type
cmd, then open Command Prompt. - Type the following command and press Enter:
powercfg /batteryreport
- Windows will display the location of the report file, usually in the user folder with the name
battery-report.html. - Open the file in a web browser.
How to read the report
The most important section is Installed batteries:
- Design Capacity: the battery’s capacity when it was new.
- Full Charge Capacity: the current maximum capacity.
Divide the Full Charge Capacity by the Design Capacity to get the health percentage. Example: 33,000 mWh ÷ 45,000 mWh = 73%.
What the battery health percentage means
| Health | Meaning |
|---|---|
| 80–100% | Still very good |
| 60–80% | Normal for a laptop that’s a few years old |
| Below 60% | Battery life has significantly decreased; consider replacing it |
Also note the Cycle Count, which refers to how many times the battery has been fully charged. Laptop batteries are generally designed to last for hundreds of cycles before their capacity drops significantly.
Tips for prolonging battery life
- Avoid leaving your laptop with a completely drained battery for long periods of time.
- Keep your laptop away from excessive heat, such as inside a car parked in direct sunlight.
- Use the original charger with the appropriate power rating.
- If your laptop has a charging limiter feature (such as power-saving mode on some brands), enable it when the laptop is frequently plugged in.
This report is also useful when buying a used laptop: ask the seller to provide a battery report before you pay.



